OMG Training in Osaka

Modeling and Documentation for Business Analysis is a practical course focused on standard modeling languages and tools used to capture, visualize, and validate business requirements and processes.

This instructor-led, live training (online or onsite) is aimed at professionals with limited or no experience in modeling who wish to apply industry-standard techniques like UML, BPMN, and wireframing tools to improve clarity and communication in business analysis projects.

By the end of this training, participants will be able to:

• Use UML diagrams to represent functional requirements and system behavior.
• Model business processes using BPMN standards.
• Create clear and structured use case diagrams and documentation.
• Design wireframes and interactive prototypes using Figma and Balsamiq.

Format of the Course

• Interactive lecture and discussion.
• Hands-on use of modeling tools in sample project scenarios.
• Guided exercises focused on process, requirements, and UI modeling.

Course Customization Options

• To request a customized training for this course based on your organization’s standards or preferred toolset, please contact us to arrange.

This instructor-led, live training in Osaka (online or onsite) is aimed at programmers or anyone who wish to learn and use OCL and OWL for expressing all kinds of model query, manipulation, and specification requirements.

By the end of this training, participants will be able to:

• Have a better understanding of OCL and OWL architecture.
• Use OCL and OWL to express model transformations.

This is a 2-day course that focuses on simulating SysML models.

This instructor-led, live training (onsite or remote) is aimed at those who wish to use Cameo Simulation Toolkit to effectively create and run SysML diagrams and models.

By the end of this training, participants will be able to:

• Prepare and configure SysML diagrams for simulation.
• Execute Activity diagrams.
• Execute State Machine diagrams.
• Execute Parametric diagrams.
• Execute Sequence diagrams.

To attend this course the participant should meet the prerequisities and have a good understanding of the SysML diagrams.

Format of the Course

• Interactive lecture and discussion.
• Lots of exercises and practice.
• Hands-on implementation in a live-lab environment.

Course Customization Options

• To request a customized training for this course, please contact us to arrange.

This is a 3-day training covering principles of modeling, UML, SysML and use of MagicDraw or Cameo following a case study, which demonstrates a typical model-based systems engineering approach.

The course:

• Includes lectures and hands-on practice in using MagicDraw or Cameo for systems modeling using SysML;
• Explains major SysML concepts and diagrams;
• Provides hands-on experience building system model examples;
• Shows how to trace model elements in different views;
• Explains how to use MagicDraw features efficiently;
• Is based on a consistent modeling case study.

Audience:

• System architects, system engineers, software architects and other stakeholders who will create and use models.

Methods:

• Presentations, discussions, and case study-based practical assignments.

Course Materials:

• Slides, case study model, and practical assignment descriptions.

Certificates:

• Each participant receives NobleProg certificate indicating that he/she attended the training.

The training in "Object-Oriented Analysis and Design using UML" is addressed to analysts, designers, programmers, testers and project managers, offering an introduction to system modeling using UML. Through case studies, participants gain skills in modeling requirements, business processes, as well as documentation of functional and non-functional requirements. The next stages of training include the analytical model, design phases - both static and dynamic, and practical use of the modeling tool Enterprise Architect. The training provides a solid basis for effective modeling of processes in enterprises, using UML at all stages of software development.

The course extends possessed knowledge of UML. During the training, we focus on the practical use of the language of the UML object-oriented analysis.

The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the Magicdraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE.

Business Process Model and Notation (BPMN), Decision Model and Notation (DMN) and Case Management Model and Notation (CMMN) are three Object Management Group (OMG) standards for processes, decisions, and case modelling. This course provides an introduction to all of them and informs when should we use which.

Objective:

This training course aims at helping business analysts to learn to model efficiently their business processes using BPMN as well as resources that are handled by their activities. Being conducted by an agile enterprise framework, business analysts learn during this course how to use appropriate BPMN notations and business extensions of UML in order to deal with their "business requirements" and coherently drive underlying design level activities.

This instructor-led, live training in Osaka (online or onsite) is aimed at beginner-level / intermediate-level / advanced-level individuals who wish to use to develop skills in business and process modeling for a better understanding of the organization, products, and dependencies between processes, data, and stakeholders.

By the end of this training, participants will be able to:

• Understand the role of models as key communication tools in business analysis.
• Be able to select the right modeling method (BPMN, UML, SIPOC, Business Model Canvas) for a specific business goal.
• Know how to decompose complex business processes into clear diagrams.
• Identify touchpoints between processes, data, and system actors.
• Be able to assess the correctness and effectiveness of created business models.

This training will teach you how to use SysML, the modeling language for systems engineering. In particular, you will learn about block diagrams for structural modeling of complex systems. You will deepen the sequence diagram, state diagram and activity diagram for dynamic modeling.

You will also learn how to use specific SysML diagrams such as the requirements diagram and the parametric diagram, as well as the concept of allocation. We will also emphasize the need to define a modeling approach, adapted to the business context and the type of system to be studied.

The practice will be done using the Cameo Systems Modeler (MagicDraw) modeling tool from NoMagic.

Teaching method

• Theoretical presentation illustrated with examples
• 50% practical work with Cameo Systems Modeler on a case study throughout the training

There are plenty of tried and tested patterns widely available to everyone. Sometimes it is a matter of changing the names and implementing the pattern in a specific technology. It can save hundreds of hours, which otherwise would be spent on design and testing. Training Goals This course has two goals: first, it allows you to reuse widely-known patterns, second, it allows you to create and reuse patterns specific to your organization. It helps you to estimate how patterns can reduce costs, systematize the design process and generate a code framework based on your patterns. Audience Software designers, business analysts, project managers, programmers and developers as well as operational managers and software division managers. Course Style The course focuses on use cases and their relationship with a specific pattern. Most of the examples are explained in UML and in simple Java examples (the language can change if the course is booked as a closed course). It guides you through the sources of the patterns as well as showing you how to catalogue and describe patterns which can be reused across your organization.

This Introduction to Enterprise Architect training course is designed for all persons who wish to use Sparx Systems’ UML modelling tool, Enterprise Architect, for their modelling activities yet are unfamiliar with the features, functions and use of Enterprise Architect.

Using a combination of lectures, demos, and interactive labs, this course showcases the foundations for building and maintaining an Enterprise Architecture (EA) utilizing the Unified Architecture Framework (UAF) version 1.2.

The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the MagicDraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE. This training covers the fundamentals of creating templates and generating reports within the MagicDraw/Cameo tool suite, and teaches how macros and scripts work inside MagicDraw and what they can be applied to.

The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the MagicDraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE. This training is also designed to provide professionals with a background behind architectural simulation, an introduction to the Simulation Toolkit plugin, the simulation of multiple diagram types, and how to tie diagram simulations together to automate the architecture.​

The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the MagicDraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE. This training teaches the core concepts and features of validation rules, validation suites, and model metrics and is designed to introduce the core concepts and features of developing and utilizing model queries in MagicDraw/Cameo.​

The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the MagicDraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE. This training provides a basic introduction to the core concepts and features of CATIA No Magic’s Teamwork Cloud, along with introducing the core concepts and features of Domain Specific Languages (DSL) in MagicDraw.​

This course teaches how to design and execute decisions with OMG DMN (Decision Model and Notation) standard.

Objective : This course aims at helping attendees understand how to put in practice the UAF and NAF enterprise architecture frameworks.

Understanding concepts of the UAF 1.1 in the context of the NATO NAF v4 Architecture Framework is very beneficial as the Domain Meta-model (DMM) of UAF describes various stakeholder concerns associated with a system, such as security, information or measurements through a set of predefined viewpoints and then mapped to the corresponding views in NAFv4.

On the other hand, the Architecture Stages of the NATO NAFv4 Methodology helps to understand how to make use efficiently of the views of the UAF to ensure coherence and completeness while enabling traceability from high-level goals until personal and physical resources that need be deployed to realize them.

Concepts and techniques explained during the course are progressively applied by the attendees using an end-to-end case study and different exercises on it.

Format of the Course

• Interactive lecture and discussion.
• Lots of exercises and practice.
• Hands-on implementation in a live-lab environment.

Course Customization Options

• To request a customized training for this course, please contact us to arrange.

OCEB2 Content Developer

NobleProg has official OMG OCEB 2 Content Developer status, which means that our course outlines and training materials were developed by the same experts who prepared questions for OCEB 2 exams.

This course prepares you for the OMG Certified Expert in BPM (OCEB v2) Fundamental Examination.

After this course you can practise using our testing engine on over 200 sample questions.

The OCSMP Model Builder – Fundamental examination tests knowledge and skills required to construct a basic SysML model of a system. The examination covers model concepts and organization, basic requirements capture and management, structure and behavior models, parametric models, allocation relationships, and use of stereotypes. Using the knowledge and skills covered at this level plus familiarity with a suitable SysML modeling tool, a holder of the OCSMP Model Builder – Fundamental Certification should be a productive contributor to modeling tasks performed by a Systems Engineering team employing a model-based systems engineering approach using SysML.  The OCSMP Model Builder – Fundamental Certification is a prerequisite for the program’s two higher levels, and requires the OCSMP Model User Certification as its prerequisite. 

This examination (as well as the others in the OCSMP series) tests your ability to apply the knowledge and skills listed here in the context of a model of a system. As you study, go beyond each individual diagram to understand how aspects that it models can influence or affect aspects of the system represented in other diagram types. 

The OCSMP Model Builder – Intermediate examination tests the knowledge and skills used to develop system models using the full SysML feature set. This capability enables more detailed and precise modeling of requirements, structure, behavior, and parametric constraints than those modeled at the Fundamental level. In addition, this engineer has the understanding needed to organize complex models, define the inter-relationships among model elements and diagrams, and assess aspects of model quality including conformance to language and method constraints. The level of knowledge tested by this certification, accompanied by a corresponding level of expertise in model based systems engineering methods and tools, is appropriate for a System Modeling Lead for a project and for the top-ranked team members who contribute independently to the model or to the system, such as a Lead Systems Engineer. The OCSMP Model Builder - Intermediate Certification is a prerequisite for the program's highest certification, OCSMP Model Builder – Advanced, and requires the OCSMP Model Builder – Fundamental certification as its prerequisite.

This course prepares you for the OMG Certified Systems Modeling Professional (OCSMP).

https://www.omg.org/ocsmp/index.htm

This course gives a solid understanding across all aspects of OMG United Architecture Framework. It does not focus on a specific view or function, but allows the delegates to easily find more information in the documentation and easily understand it.

During the course the delegates will do simple exercises, answer questions, etc...

Sparx Enterprise Architect is usually used during the course, but any other tools can be used instead.

Objective:

Helping Analysts and Designers of the System Engineering domain to understand how to efficiently gather requirements then go through the embedded software design implementation on the basis of system specifications using UML 2 and SysML.

This 3 days training aims at assisting system analysts to express efficiently their needs and designers to make the appropriate architectural design of the system on the basis of these needs.

The resulting system architecture provides a good level of agility to the embedded system software in face of changes as it allows a coherent traceability of the business rules encapsulated in system functions and those of the usage choices (use cases) of the end-users toward the software implementation level.

This course is offered in two variants to provide a practical understanding of how systems can be modelled using the newest version of OMG's Systems Modelling Language (SysML) specification. The notation and underlying semantics of SysML are explained in a way that allows students to apply what they learn to any suitable system modelling method or tool.

This instructor-led, live training in Osaka (online or onsite) is aimed at project managers, architects, and system engineers who wish to model and evaluate systems using SysML V2 features and capabilities.

By the end of this training, participants will be able to specify, analyze, design, and verify complex systems using SysML V2.

In this instructor-led, live training in Osaka (online or onsite), participants will learn how to use SysML as implemented in Enterprise Architect (EA) to carry out system requirements analysis and modeling.

By the end of this training, participants will be able to:

• Understand and apply SysML to Systems Engineering projects, using a Model Based Systems Engineering (MBSE) approach.
• Identify system requirements based on use case models.
• Design and analyze system architecture.

This practical training will show you how to use efficiently the SysML modeling language. You will discover in particular the block diagrams for structural modeling of complex systems. You will deepen the sequence diagram, the state diagram and activity diagram for dynamic modeling. You will also learn to use specific SysML diagrams, such as the requirements diagram and the parametric diagram, as well as the important concept of allocation. We will also focus on the need to define a modeling approach, adapted to the context of the company and the type of system to be studied. We will finally see what is the state of the art of SysML modeling tools.

Audience:

Project managers, architects, system engineers, having to model complex systems including both software and hardware

Teaching Method:

• Theoretical presentation with examples
• Case Study on paper (demo of a SysML tool by the trainer)

This course is designed to teach Systems Modeling Language (SysML) from a reviewer's perspective, along with an introduction to the Cameo Collaborator tool.

The course is designed for analysts, designers, developers, testers and project managers.

The workshop presents a problem analysis, design and documentation systems using UML and Enterprise Architect of Sparx Systems. During the training will be presented to the advanced capabilities of the program (such as MDA, profiles, XMI), and best practices that can greatly simplify and accelerate modeling.

Because the training focuses on the Enterprise Architect tool it is required for participants to already know how to model in UML. For those who would like to learn modeling we have dedicated training for UML.

The training method

Lecture 10%, 90% workshop

One of the fastest growing roles in the IT industry is the IT Business Analyst. Business Analysts are found in almost organizations and are important members of any IT team whether in the private or public sector.

This course provides a clear, step-by-step guide to how the Business Analyst can perform his or her role using state-of-the-art object-oriented technology.

This course has been created for Subject Matter Experts which are required to model their data with UML.

It covers consistent modelling techniques without going into implementation details.

UPDM is an Object Management Group (OMG) initiative to develop a modeling standard that supports both the USA Department of Defense Architecture Framework (DoDAF) and the UK Ministry of Defence Architecture Framework (MODAF). The modeling standard is called the Unified Profile for DoDAF and MODAF (UPDM).

This course is designed for business analysts, managers, team leads and process owners to provide them with the required competencies for creating use case diagrams and use case scenarios, which serve as a vehicle for eliciting, analyzing, documenting and communicating functional requirements. Delegates will practice creating use cases in the Unified Modeling Language (UML) to graphically represent the interactions between use cases and actors.

OCUP2 Content Developer

NobleProg has official OMG OCUP 2 Content Developer status, which means that our course outlines and training materials were developed by the same experts who prepared questions for OCUP 2 exams.

Audience

Developers, programmers, business analysts, project managers, software architects, testers, people responsible for documentation or anyone involved in the software development process.

Objectives

Prepares you to work with the most commonly encountered UML elements
Teaches you how to create simple UML models
Prepares you to be a member of a UML Development Team

Audience:

Developers, programmers, business analysts, project managers, software architects, testers, people responsible for documentation or anyone involved in the software development process.

Objectives:

Prepares you to work with a broad range of UML elements
Teaches you how to create complex UML models
Prepares you to become a qualified senior member of a UML Development Team.

Course Audience:

Managers who want to understand BPMN diagrams, Business Consultants, Business Analysts, Business Process Engineers, System Analysts and anyone who is involved in analyzing and planning Business Processes using standardized, unified modelling notation.

Course Goals:

• Produce high-quality process diagrams
• Model in the BPMN process notation
• Capture as-is process information
• Implement optimized process flows for people-intensive processes
• Simplify complex process definitions and break them into more manageable pieces

This course prepares you for the OCEB 2 Advanced exam, covering advanced BPM concepts including BMM, BPMN, DMN, business rules, process improvement frameworks, governance, and performance optimization to deepen modeling and analytical skills.