横浜のOMGトレーニング

Modeling and Documentation for Business Analysis is a practical course focused on standard modeling languages and tools used to capture, visualize, and validate business requirements and processes.

This instructor-led, live training (online or onsite) is aimed at professionals with limited or no experience in modeling who wish to apply industry-standard techniques like UML, BPMN, and wireframing tools to improve clarity and communication in business analysis projects.

By the end of this training, participants will be able to:

• Use UML diagrams to represent functional requirements and system behavior.
• Model business processes using BPMN standards.
• Create clear and structured use case diagrams and documentation.
• Design wireframes and interactive prototypes using Figma and Balsamiq.

Format of the Course

• Interactive lecture and discussion.
• Hands-on use of modeling tools in sample project scenarios.
• Guided exercises focused on process, requirements, and UI modeling.

Course Customization Options

• To request a customized training for this course based on your organization’s standards or preferred toolset, please contact us to arrange.

This instructor-led, live training in 横浜 (online or onsite) is aimed at programmers or anyone who wish to learn and use OCL and OWL for expressing all kinds of model query, manipulation, and specification requirements.

By the end of this training, participants will be able to:

• Have a better understanding of OCL and OWL architecture.
• Use OCL and OWL to express model transformations.

This is a 2-day course that focuses on simulating SysML models.

This instructor-led, live training (onsite or remote) is aimed at those who wish to use Cameo Simulation Toolkit to effectively create and run SysML diagrams and models.

By the end of this training, participants will be able to:

• Prepare and configure SysML diagrams for simulation.
• Execute Activity diagrams.
• Execute State Machine diagrams.
• Execute Parametric diagrams.
• Execute Sequence diagrams.

To attend this course the participant should meet the prerequisities and have a good understanding of the SysML diagrams.

Format of the Course

• Interactive lecture and discussion.
• Lots of exercises and practice.
• Hands-on implementation in a live-lab environment.

Course Customization Options

• To request a customized training for this course, please contact us to arrange.

この3日間のトレーニングでは、モデリングの原則、UML、SysML について学び、MagicDraw や Cameo を使用してケーススタディを追うことで、典型的なモデルベースのシステムエンジニアリングアプローチを紹介します。

このコース:

• MagicDraw や Cameo を使用したシステムモデリングのための講義と実践的な練習を含みます；
• 主要な SysML の概念と図について説明します；
• システムモデル例を作成するための手順を提供します；
• 異なるビューでモデル要素を追跡する方法を示します；
• MagicDraw の機能を効率的に使用する方法を説明します；
• 一貫したモデリングケーススタディに基づいています。

対象者:

• システムアーキテクト、システムエンジニア、ソフトウェアアーキテクトなど、モデルを作成し使用する関係者。

方法:

• プレゼンテーション、ディスカッション、ケーススタディに基づく実践的な課題。

コース資料:

• スライド、ケーススタディモデル、および実践的課題の説明。

証明書:

• 各参加者に、このトレーニングに出席したことを示す NobleProg 証明書が交付されます。

The training in "Object-Oriented Analysis and Design using UML" is addressed to analysts, designers, programmers, testers and project managers, offering an introduction to system modeling using UML. Through case studies, participants gain skills in modeling requirements, business processes, as well as documentation of functional and non-functional requirements. The next stages of training include the analytical model, design phases - both static and dynamic, and practical use of the modeling tool Enterprise Architect. The training provides a solid basis for effective modeling of processes in enterprises, using UML at all stages of software development.

このコースは、既存のUMLに関する知識を拡張します。トレーニング中には、UMLオブジェクト指向分析言語の実践的使用に焦点を当てます。

このコースは、システムモデリング言語（SysML）の基礎、Magicdraw/Cameo ソフトウェアを介した SysML の応用、基本的なモデルベースシステムエンジニアリング（MBSE）のシミュレーション技術、および MBSE のベストプラクティスについて教授することを目指しています。

Business Process Model and Notation (BPMN), Decision Model and Notation (DMN) and Case Management Model and Notation (CMMN) are three Object Management Group (OMG) standards for processes, decisions, and case modelling. This course provides an introduction to all of them and informs when should we use which.

Objective:

This training course aims at helping business analysts to learn to model efficiently their business processes using BPMN as well as resources that are handled by their activities. Being conducted by an agile enterprise framework, business analysts learn during this course how to use appropriate BPMN notations and business extensions of UML in order to deal with their "business requirements" and coherently drive underlying design level activities.

This training will teach you how to use SysML, the modeling language for systems engineering. In particular, you will learn about block diagrams for structural modeling of complex systems. You will deepen the sequence diagram, state diagram and activity diagram for dynamic modeling.

You will also learn how to use specific SysML diagrams such as the requirements diagram and the parametric diagram, as well as the concept of allocation. We will also emphasize the need to define a modeling approach, adapted to the business context and the type of system to be studied.

The practice will be done using the Cameo Systems Modeler (MagicDraw) modeling tool from NoMagic.

Teaching method

• Theoretical presentation illustrated with examples
• 50% practical work with Cameo Systems Modeler on a case study throughout the training

数多く試され、検証されたパターンが広く利用可能です。時として、名前の変更や特定のテクノロジーでの実装が必要な場合もあります。これにより、デザインとテストにかかる数百時間の労力を節約できます。このコースの目的は2つあります。1つ目は、広く知られているパターンを再利用することです。2つ目は、組織固有のパターンを作成し、再利用することです。パターンがどのようにコスト削減や設計プロセスの体系化、そしてパターンに基づいたコードフレームワークの生成に貢献するかを推定するのに役立ちます。対象者 ソフトウェアデザイナーやビジネスアナリスト、プロジェクトマネージャー、プログラマーや開発者、オペレーションマネージャー、ソフトウェア部門マネージャー。コーススタイル このコースはユースケースと特定のパターンとの関連性に焦点を当てています。ほとんどの例はUMLと単純なJavaの例で説明されますが（コースがクローズドコースとして予約された場合、言語は変更可能です）。また、パターンのソースや組織内で再利用できるパターンのカタログ化と記述方法についても案内します。

This Introduction to Enterprise Architect training course is designed for all persons who wish to use Sparx Systems’ UML modelling tool, Enterprise Architect, for their modelling activities yet are unfamiliar with the features, functions and use of Enterprise Architect.

Using a combination of lectures, demos, and interactive labs, this course showcases the foundations for building and maintaining an Enterprise Architecture (EA) utilizing the Unified Architecture Framework (UAF) version 1.2.

Objective:

This training course aims at helping product managers, products owners, business analysts, system architects and developers understand how to efficiently Manage Requirements on the basis of the product vision till guiding developers accurately in implementing them.

More in detail, this course aims at assisting product managers in better defining the value propositions of their products on the basis of strategies and stakeholder needs. Business Analysts and product owners understand how to describe requirements of the product backlog then discover appropriate epics and user stories of the system while contributing to the required value creation. Along interactive case study exercises, participants learn how to describe in detail such requirements in order to validate correct understanding of needs and prepare system acceptance tests. Thus, only using a very common and productive UML profile, they learn to structure requirements in order to communicate efficiently with architects and developers through an iterative requirement gathering process.

Audience:

• Product Managers
• Product Owners
• Business Analysts
• Anyone interetsted in the Requirements Management Process

このコースは、システムモデリング言語 (SysML) の基礎、MagicDraw/Cameo ソフトウェアを介した応用、基本的なモデルベースのシステムエンジニアリング (MBSE) シミュレーション技術、および MBSE のベストプラクティスについて学ぶことを目的としています。このトレーニングでは、MagicDraw/Cameo ツールスイート内でテンプレートを作成し、レポートを生成する基礎と、MagicDraw 内でのマクロやスクリプトの動作方法およびそれらの適用範囲についても教えます。

The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the MagicDraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE. This training is also designed to provide professionals with a background behind architectural simulation, an introduction to the Simulation Toolkit plugin, the simulation of multiple diagram types, and how to tie diagram simulations together to automate the architecture.​

The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the MagicDraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE. This training teaches the core concepts and features of validation rules, validation suites, and model metrics and is designed to introduce the core concepts and features of developing and utilizing model queries in MagicDraw/Cameo.​

The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the MagicDraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE. This training provides a basic introduction to the core concepts and features of CATIA No Magic’s Teamwork Cloud, along with introducing the core concepts and features of Domain Specific Languages (DSL) in MagicDraw.​

This course teaches how to design and execute decisions with OMG DMN (Decision Model and Notation) standard.

Objective : This course aims at helping attendees understand how to put in practice the UAF and NAF enterprise architecture frameworks.

Understanding concepts of the UAF 1.1 in the context of the NATO NAF v4 Architecture Framework is very beneficial as the Domain Meta-model (DMM) of UAF describes various stakeholder concerns associated with a system, such as security, information or measurements through a set of predefined viewpoints and then mapped to the corresponding views in NAFv4.

On the other hand, the Architecture Stages of the NATO NAFv4 Methodology helps to understand how to make use efficiently of the views of the UAF to ensure coherence and completeness while enabling traceability from high-level goals until personal and physical resources that need be deployed to realize them.

Concepts and techniques explained during the course are progressively applied by the attendees using an end-to-end case study and different exercises on it.

Format of the Course

• Interactive lecture and discussion.
• Lots of exercises and practice.
• Hands-on implementation in a live-lab environment.

Course Customization Options

• To request a customized training for this course, please contact us to arrange.

OCEB2 コンテンツ開発者

NobleProg は、公式 OMG OCEB 2 コンテンツ開発者の地位を持っています。これは、当社のコース概要とトレーニング資料が OCEB 2 試験の問題を作成した同じ専門家によって開発されたことを意味します。

このコースは、OMG Certified Expert in BPM (OCEB v2) Fundamental Examination の準備をサポートします。

このコース修了後、200 以上のサンプル問題を使用してテストエンジンで練習できます。

The OCSMP Model Builder – Fundamental examination tests knowledge and skills required to construct a basic SysML model of a system. The examination covers model concepts and organization, basic requirements capture and management, structure and behavior models, parametric models, allocation relationships, and use of stereotypes. Using the knowledge and skills covered at this level plus familiarity with a suitable SysML modeling tool, a holder of the OCSMP Model Builder – Fundamental Certification should be a productive contributor to modeling tasks performed by a Systems Engineering team employing a model-based systems engineering approach using SysML.  The OCSMP Model Builder – Fundamental Certification is a prerequisite for the program’s two higher levels, and requires the OCSMP Model User Certification as its prerequisite. 

This examination (as well as the others in the OCSMP series) tests your ability to apply the knowledge and skills listed here in the context of a model of a system. As you study, go beyond each individual diagram to understand how aspects that it models can influence or affect aspects of the system represented in other diagram types. 

OCSMP Model Builder – Intermediate 試験は、SysML の全機能セットを使用してシステムモデルを開発するために必要な知識とスキルをテストします。この能力により、基盤レベルでモデリングされる要件、構造、動作、パラメトリック制約よりも詳細で正確なモデリングが可能になります。また、このエンジニアは、複雑なモデルの組織化、モデル要素や図表間の相互関係の定義、言語と方法論の制約への適合を含むモデル品質の評価に必要な理解を持っています。この認定でテストされる知識レベルと、対応するモデリングベースのシステムエンジニアリング手法とツールの専門知識は、プロジェクトのシステムモデリングリードや独立してモデルまたはシステムに貢献するトップクラスのチームメンバー（例：主担当システムエンジニア）に適しています。OCSMP Model Builder - Intermediate 認定はプログラムの最高認定である OCSMP Model Builder – Advanced の前提条件であり、その前提条件として OCSMP Model Builder – Fundamental 認定が必要です。

このコースは、OMG Certified Systems Modeling Professional (OCSMP) の受験準備を行います。

https://www.omg.org/ocsmp/index.htm

This course gives a solid understanding across all aspects of OMG United Architecture Framework. It does not focus on a specific view or function, but allows the delegates to easily find more information in the documentation and easily understand it.

During the course the delegates will do simple exercises, answer questions, etc...

Sparx Enterprise Architect is usually used during the course, but any other tools can be used instead.

Objective:

Helping Analysts and Designers of the System Engineering domain to understand how to efficiently gather requirements then go through the embedded software design implementation on the basis of system specifications using UML 2 and SysML.

This 3 days training aims at assisting system analysts to express efficiently their needs and designers to make the appropriate architectural design of the system on the basis of these needs.

The resulting system architecture provides a good level of agility to the embedded system software in face of changes as it allows a coherent traceability of the business rules encapsulated in system functions and those of the usage choices (use cases) of the end-users toward the software implementation level.

このコースは2つのバリアントで提供され、OMGのシステムモデリング言語（SysML）仕様の最新版を使用してシステムをモデル化する実践的な理解を提供します。SysMLの表記法とその背後の意味論が説明され、学生が学んだことを任意の適切なシステムモデリング手法やツールに適用できるようにします。

This instructor-led, live training in 横浜 (online or onsite) is aimed at project managers, architects, and system engineers who wish to model and evaluate systems using SysML V2 features and capabilities.

By the end of this training, participants will be able to specify, analyze, design, and verify complex systems using SysML V2.

In this instructor-led, live training in 横浜 (online or onsite), participants will learn how to use SysML as implemented in Enterprise Architect (EA) to carry out system requirements analysis and modeling.

By the end of this training, participants will be able to:

• Understand and apply SysML to Systems Engineering projects, using a Model Based Systems Engineering (MBSE) approach.
• Identify system requirements based on use case models.
• Design and analyze system architecture.

This practical training will show you how to use efficiently the SysML modeling language. You will discover in particular the block diagrams for structural modeling of complex systems. You will deepen the sequence diagram, the state diagram and activity diagram for dynamic modeling. You will also learn to use specific SysML diagrams, such as the requirements diagram and the parametric diagram, as well as the important concept of allocation. We will also focus on the need to define a modeling approach, adapted to the context of the company and the type of system to be studied. We will finally see what is the state of the art of SysML modeling tools.

Audience:

Project managers, architects, system engineers, having to model complex systems including both software and hardware

Teaching Method:

• Theoretical presentation with examples
• Case Study on paper (demo of a SysML tool by the trainer)

このコースは、リビュアーの視点からシステムモデリング言語 (SysML) の学習と、Cameo Collaborator ツールの概要を紹介することを目的としています。

The course is designed for analysts, designers, developers, testers and project managers.

The workshop presents a problem analysis, design and documentation systems using UML and Enterprise Architect of Sparx Systems. During the training will be presented to the advanced capabilities of the program (such as MDA, profiles, XMI), and best practices that can greatly simplify and accelerate modeling.

Because the training focuses on the Enterprise Architect tool it is required for participants to already know how to model in UML. For those who would like to learn modeling we have dedicated training for UML.

The training method

Lecture 10%, 90% workshop

One of the fastest growing roles in the IT industry is the IT Business Analyst. Business Analysts are found in almost organizations and are important members of any IT team whether in the private or public sector.

This course provides a clear, step-by-step guide to how the Business Analyst can perform his or her role using state-of-the-art object-oriented technology.

This course has been created for Subject Matter Experts which are required to model their data with UML.

It covers consistent modelling techniques without going into implementation details.

UPDM is an Object Management Group (OMG) initiative to develop a modeling standard that supports both the USA Department of Defense Architecture Framework (DoDAF) and the UK Ministry of Defence Architecture Framework (MODAF). The modeling standard is called the Unified Profile for DoDAF and MODAF (UPDM).

This course is designed for business analysts, managers, team leads and process owners to provide them with the required competencies for creating use case diagrams and use case scenarios, which serve as a vehicle for eliciting, analyzing, documenting and communicating functional requirements. Delegates will practice creating use cases in the Unified Modeling Language (UML) to graphically represent the interactions between use cases and actors.

このコースはOMG認定BPMエキスパート2（OCEB v2）中級試験への準備をサポートします。

OCUP2 Content Developer

NobleProg has official OMG OCUP 2 Content Developer status, which means that our course outlines and training materials were developed by the same experts who prepared questions for OCUP 2 exams.

Audience

Developers, programmers, business analysts, project managers, software architects, testers, people responsible for documentation or anyone involved in the software development process.

Objectives

Prepares you to work with the most commonly encountered UML elements
Teaches you how to create simple UML models
Prepares you to be a member of a UML Development Team

Audience:

Developers, programmers, business analysts, project managers, software architects, testers, people responsible for documentation or anyone involved in the software development process.

Objectives:

Prepares you to work with a broad range of UML elements
Teaches you how to create complex UML models
Prepares you to become a qualified senior member of a UML Development Team.

Course Audience:

Managers who want to understand BPMN diagrams, Business Consultants, Business Analysts, Business Process Engineers, System Analysts and anyone who is involved in analyzing and planning Business Processes using standardized, unified modelling notation.

Course Goals:

• Produce high-quality process diagrams
• Model in the BPMN process notation
• Capture as-is process information
• Implement optimized process flows for people-intensive processes
• Simplify complex process definitions and break them into more manageable pieces

This course prepares you for the OCEB 2 Advanced exam